| ITEM | UNIT | CW61100B | CW61125B | CW61140B | CW61160B |
| CAPACITIES | |||||
| Swing over bed | mm | 1000 | 1250 | 1400 | 1640 |
| Swing over carriage | mm | 615 | 865 | 1015 | 1250 |
| Max.length of workpiece | mm | 1500 2000 3000 4000 5000 6000 8000 10000 12000 | |||
| Max.turning length | mm | 1300 1800 2800 3800 4800 5800 7800 9800 11800 | |||
| Pan of guideway | mm | 755 | |||
| SPINDLE | |||||
| Spindle nose | mm | A2-15(8×M22) | |||
| Spindle bore | mm | 130 | |||
| Taper hole of spindle | 1:20/140 | ||||
| Range of spindle speeds | r/min | forward:3.15~315 ; reverse:3.5~291 | |||
| No.of spindle speeds | forward:21; reverse:12 | ||||
| FEED | |||||
| No.of Longitudinal and cross | 56/56 | ||||
| Feed per revolution | mm | Longitudinal:0.1~12;cross:0.05~6;top slide:0.025~3 | |||
| No. and range of metric thread | 44;1~120mm | ||||
| No. and range of inch thread | 31;28~1/4 | ||||
| No. and range of module thread | 45;0.5~60mm | ||||
| No. and range of dia. thread | 38;1/2~56DP | ||||
| turret | |||||
| Distance of centerline and tool resting plane | mm | 48 | |||
| Tool post swing range | ° | ±90° | |||
| Max.travel of cross slide | mm | 520(20″) | 580 | 580 | 630 |
| Max.travel of top slide | mm | 300 | |||
| Section of tool shank | mm | 45(260×260) | |||
| Rapid travel speeds | mm/min | Longitudinal:3740;cross:1870;Little slide:935 | |||
| TAILSTOCK | |||||
| Dia. of tailstock | mm | 160(6″) | |||
| Travel of tailstock quill | mm | 300(12″) | |||
| Taper hole of tailstock quill | morse 6 | ||||
| OTHERS | |||||
| Main motor power | kw | 22 | |||
| Length | mm | 4600 5100 6100 7100 8100 9100 11100 13100 15100 | |||
| Width | mm | 2150 | |||
| Height | mm | 1700 1825 2150 | |||
| Max.weight of workpiece | kg | 6000 | |||
Standard Accessorias:
1.1000MM 4-jaw manual chuck
2.50-220MM follow rest
3.50-425MM steady rest(for cw61100b)
50-475MM steady rest(for cw61125b&cw61140b&cw61160b)
4.Working light
5.Manual tailstock
6.Technical documents
7.Attachment tools
